SOLAS Reflective tape adhesive 50×45,7m

IMPA 330189

T-ISS SolasFlex Retro Reflective Tape Type II is used for the reflection of SOLAS life-saving appliances such as life jackets, life rafts, or lifeboats. The tape is specially designed for the marine / offshore industry, and has a long life span, high clarity, and anti-elimination. Reflective tape consist of an encapsulated optical design with a high reflective value that is clearly visible from every angle, both in dry and wet conditions. SolasFlex Retro Reflective Tape is type II approved according to IMO A658(16) and it can be used indoor as well as outdoor and is suitable for all applications, extreme weather conditions and continuous outdoor exposure.

Approvals:
• USCG
• DNV
• Wheelmark
• Korean Register

Standards:
• Complies with IMO Res. A658(16) and meets USCG specification 46 CFR Part 164

Specifications:

• Adhesive:
• 50 x 45,7 m – 1,2 kg

INSTALLATION INSTRUCTIONS:

1. Clean the surface carefully.
2. The tape should be installed making sure that these finished surfaces are clear of dirt, dust and fat.
3. Unroll the material and cut to fit the area to be glued or stitched on.
4. When installing around a lifebuoy always take an overlap of 5 cm. (Must be above 15 C°)
5. After installing on the surface the tape should be there for at least 12hrs for perfect adhesion.